Introduction to the precautions for special vacuum switches for reactive power compensation, come and collect them!

Since the rapid development of power electronics technology in the 1970s, it has provided solid support for the realization of reactive power compensation technology. At present, most of my country's distribution network systems use reactive power compensation technology, which compensates the reactive power of the power system to a great extent, thereby ensuring the stability of power quality and reducing the loss of distribution lines and the cost of the power grid system. , which also laid a solid foundation for the development of my country's power industry.

It is an intelligent electronic power device, mainly used in mains power equipment to compensate for the load of reactive power generated in these equipment. On the basis of compensating the reactive power in the power system, this device also saves more electric energy for the power system.

It has two classifications: one is a capacitor with magnetic current, and the other is an inductor with magnetic current. Their working modes are different. Capacitors with magnetic current can directly provide reactive current, while inductors with magnetic current must work properly with the help of capacitors.

Its advantage is that it can effectively compensate for resonance terms and eliminate bus voltage ripples. The disadvantage is that it is more expensive and has lower reactive power compensation capabilities than capacitors.

Its application is mainly in electronic power equipment. For example, special vacuum switches for reactive power compensation can be used in urban underground grids, substations, thermal power plants, wind farms, solar power plants, etc.

Its future development direction is mainly to further improve its application range and control accuracy, as well as reduce its manufacturing cost.

With the continuous development of my country's power industry, the market prospects for vacuum switches dedicated to reactive power compensation are becoming more and more broad. This technology can significantly improve power quality and reduce energy consumption, so it has been favored by many companies.

In short, as a kind of intelligent power equipment, it plays an important role in improving power quality and saving energy. We also believe that as the technology becomes increasingly mature, the application of vacuum switches dedicated to reactive power compensation will become more and more widespread.

Special vacuum switch for reactive power compensation is a commonly used electrical equipment, its main function is to perform reactive power compensation on the power system. In order to ensure its normal operation, you need to pay attention to the following matters.

The vacuum switch dedicated for reactive power compensation must be installed at a suitable location in the power system to avoid being affected by excessive voltage, current, arc, etc. At the same time, pay attention to the temperature, humidity and other factors of the surrounding environment to avoid affecting the normal operation of the equipment.

The vacuum switch dedicated for reactive power compensation requires frequent maintenance during its working process to ensure its normal operation. The electrical performance, mechanical structure and insulation performance of the equipment can be regularly checked to detect and deal with problems in a timely manner.

There are many ways to use the vacuum switch dedicated to reactive power compensation. The correct method of use must be selected according to the characteristics and requirements of the equipment. At the same time, regular operational training and technical improvements are carried out according to the actual situation to make use more convenient and safer.

When a fault occurs, you need to choose the correct handling measure based on the actual situation. At the same time, pay attention to on-site safety to avoid accidents. If you cannot solve it by yourself, you should contact professionals or manufacturers for repair or replacement in time.

When using a special vacuum switch for reactive power compensation, you must abide by relevant national laws and regulations, pay attention to safe operation, protect the environment, and prevent effects on the human body and equipment.

To sum up, there are many things that need to be paid attention to when using the vacuum switch dedicated for reactive power compensation. Only by strictly complying with the requirements can we ensure its normal operation, improve work efficiency, and better serve the power system.